*
Re: Post details of your rig in here
« Reply #240 on: July 23, 2008, 04:27:11 pm »
Insane Overclocking dude!!  :o mine cant pass 1600FSB with E6600 x9 multi.
Your Motherboard is very stable I think.
btw how is the heat??
My Sig is gone :S
*
Re: Post details of your rig in here
« Reply #241 on: July 24, 2008, 01:32:06 pm »
Insane Overclocking dude!!  :o mine cant pass 1600FSB with E6600 x9 multi.
Your Motherboard is very stable I think.
btw how is the heat??

Awwh well only thing thats holding me back from ocing it more is the RAM, (which is doing a fine job for a 667 cheapo KVR) it just doesnt go beyond 855Mhz, The mobo is a Vanilla P5K, I did a Pencil Volt mod to virtually eliminate Vdroop and that made a it quite stable, plust the Crossflashed bios from the P5KR bios contributed lol, The temps are like 35~37C when idle (T-Junction) when i put it on Prime95 for 8 hours it goes to about 75~77C which is about ~10C below the T-Junction max (85C for my Model), I can Live with that. dude btw whats ur mobo, and ur RAM cuz ur CPU is quite capable of ocing hell of lot more than that, and Get rid of the stock cooler mate, I use a Asus V-Nardo its quite good, got it from EPSI for 3700 RS
intel Core i7 920 D0 @ 4.2Ghz , Vcore 1.37v, Mult 21| EVGA X58 SLI 3 | Palit Geforce GTX 460 1GB Core 840 Mem 3.6Ghz | G.Skill PI 1600Mhz CL7 6GB kit x 2 (12GB)| Corsair H80 with two Delta AFC1212D-PWM 113CFM fans in Push Pull  | In Win Commander 750W 88% Efficient PSU | Soundblaster X-FI Extreme Music | DIY Sub Amp Speakers | Razer Lycosa + Razer Abyssus + Razer Goliathus | Samsung Syncmaster 2223 22"" | 2 x 250GB Samsung Spinpoint F3 | 2 x OCZ Agility III 120 GB | Cooler Master HAF 932 Advanced Casing
*
Re: Post details of your rig in here
« Reply #242 on: July 24, 2008, 04:36:23 pm »
I got P5N32-E SLI PLUS & I tried OCing DDR667 to 800 but failed. I can't OC CPU much because of the Stock Cooler.
My Sig is gone :S
*
Re: Post details of your rig in here
« Reply #243 on: July 24, 2008, 05:35:15 pm »
I got P5N32-E SLI PLUS & I tried OCing DDR667 to 800 but failed. I can't OC CPU much because of the Stock Cooler.

u should try lowering ur memory timings, and increase the Vcore to atleaset 1.29 (including the Vdroop) ur board is great for ocing, i think its ur Ram and the cooler letting u down, mostly i blame the Ram, Increase the DRAM voltage to 1.85 and try again.
intel Core i7 920 D0 @ 4.2Ghz , Vcore 1.37v, Mult 21| EVGA X58 SLI 3 | Palit Geforce GTX 460 1GB Core 840 Mem 3.6Ghz | G.Skill PI 1600Mhz CL7 6GB kit x 2 (12GB)| Corsair H80 with two Delta AFC1212D-PWM 113CFM fans in Push Pull  | In Win Commander 750W 88% Efficient PSU | Soundblaster X-FI Extreme Music | DIY Sub Amp Speakers | Razer Lycosa + Razer Abyssus + Razer Goliathus | Samsung Syncmaster 2223 22"" | 2 x 250GB Samsung Spinpoint F3 | 2 x OCZ Agility III 120 GB | Cooler Master HAF 932 Advanced Casing
Re: Post details of your rig in here
« Reply #244 on: July 25, 2008, 05:15:08 pm »
Hey guys can u let me know a gud gaming mouse and how much it would roughly cost?

cheers

*

    Offline _RangeR_

  • ***
  • 359
  • 5
  • _RаиĢэЯ_ ďа Ρľача
    • View Profile
    • xfire.com
Re: Post details of your rig in here
« Reply #245 on: July 25, 2008, 05:17:52 pm »
go for Logitech G15 Gaming mouse...awesom bro.....u can buy frm EPSI head office...

my one cost me 8500....



*

    Offline painkiller

  • ***
  • 416
  • 1
  • Success is a journey...not a destination!!
    • View Profile
    • the coffin cRammeRs
Re: Post details of your rig in here
« Reply #246 on: July 25, 2008, 05:31:11 pm »
go for Logitech G15 Gaming mouse...awesom bro.....u can buy frm EPSI head office...

my one cost me 8500....
G15 ?? wow another 1? As i remember u have A G5 mouse..
*

    Offline _RangeR_

  • ***
  • 359
  • 5
  • _RаиĢэЯ_ ďа Ρľача
    • View Profile
    • xfire.com
Re: Post details of your rig in here
« Reply #247 on: July 25, 2008, 05:33:39 pm »
ahh sorry...G15 is da Key board...

yeah...pain u also have da same one ne..hehe

vageta its G5 gaming mouse



Re: Post details of your rig in here
« Reply #248 on: July 25, 2008, 06:50:31 pm »
Hey guys can u let me know a gud gaming mouse and how much it would roughly cost?

cheers





Go for a logitech MX518... i think it costs about RS 5000
*
Re: Post details of your rig in here
« Reply #249 on: July 25, 2008, 07:41:24 pm »
AMD Athlon X2 64  +4400Mhz
2GB Kingston
1GB  ATI Radeon Xpress 1200
250 GB Serial ATA HD
Realtek HD Audio
DVD Writer
CD Writer
Keyboard, Mouse, Subs blah blah !!!

Genuine Vista SP1 on GIGABYTE
« Last Edit: July 25, 2008, 07:44:29 pm by Rogue »
Re: Post details of your rig in here
« Reply #250 on: July 25, 2008, 08:12:32 pm »
thanx ranger and is logitech the best? wat abt fatality? i saw the G5 on ebay for abt 2500-3000 bucks

thanx again

cheers
Re: Post details of your rig in here
« Reply #251 on: July 25, 2008, 08:15:36 pm »
AMD Athlon X2 64  +4400Mhz
2GB Kingston
1GB  ATI Radeon Xpress 1200
250 GB Serial ATA HD
Realtek HD Audio
DVD Writer
CD Writer
Keyboard, Mouse, Subs blah blah !!!

Genuine Vista SP1 on GIGABYTE


Nice rig (Y)

@Vageta: Death Adder is better than logitech, it says dat Gaming PC's such as AlienWare recomends Death Adder
Re: Post details of your rig in here
« Reply #252 on: July 25, 2008, 08:49:38 pm »
hey virtual is there any agent who does Death Adder in Colombo?  ???
Re: Post details of your rig in here
« Reply #253 on: July 25, 2008, 08:51:29 pm »
no i don't think so.. dose stuff are expensive though.... anyway lets get on to the topic shall we :)
Geforce 6200lx AGP DDR2 256MB
« Reply #254 on: July 26, 2008, 06:49:05 am »
I have a Graphics card that i am selling it is a year old and woks fine the best game that it has played is company of heroes with all setting medium and 1024x768. over all good card
if interested email [email protected]