web analytics
Re: People's review - EGlobe Solutions
« Reply #60 on: July 30, 2016, 01:49:00 pm »
I just had a look at the image in a enlarged mode i feet that the heat sink has not been properly fixed which should hv caused this. Also the thermal cannot spread out so much to the edge of both left n right side n in front.

Note : Also i can see lots of  air bubbles in this photo
this is after i started removing it after i saw the first brown area i checked to see if the other areas had also turned brown 
Such destruction, much waste, such wow , console is better than pc
Re: People's review - EGlobe Solutions
« Reply #61 on: July 30, 2016, 05:11:48 pm »
i was the person who assembled janith's pc.
I've been applying thermal paste since i was 12 years old, the time i have been building pc's from, this is my fifth year now, i have never had problems like this, I have used cooler master paste and thermaltake paste before buying arctic silver 5 from you. I have never had such a bad experience. i clean my CPU with isopropyl alcohol when i clean old thermal paste.

This is Sri Lanka people. End of the day it's us customers fault. Even though we may know about those stuff better than them.
Intel Core i7 6700K | MSI Z170 Gaming M7 | Sapphire Radeon RX 480 Nitro+ | G.SKILL Ripjaws V Series 16GB (2 x 8GB) 3000MHz | Samsung 850 Pro 250GB | 2 Western Digital Blue 1TB | SeaSonic X Series X650 Gold  | Cooler Master:Master case Pro 5 | Logitech G402 | Sennheiser HD 598SE | Logitech G810 Orion Spectrum